Soccer Jersey Fabrics: GSM, Interlock, Mesh and Pique
Ask a club what their last kit was made from and most of them will not know. They remember the colour, the badge and whether it felt right on a hot afternoon — but the fabric was decided by someone else, and the fabric is what decides how a shirt feels, how it holds up over a season, and whether your players actually like wearing it.
This post explains the four things that matter when you choose a soccer jersey fabric: what GSM means, what interlock is, what mesh is, and what pique is. It is the how-to-choose guide. The full specification table for the six fabrics we stock — names, weights and best uses — is on our soccer jersey fabrics page, and this post links to it wherever you need the numbers.
What GSM Means, and Why It Is the First Number to Understand
GSM stands for grams per square metre. It is the weight of one square metre of fabric, and it is the simplest way to compare two fabrics before you have held either of them. A higher GSM means a heavier fabric. A lower GSM means a lighter one.
For soccer jerseys, the range clubs actually order from is roughly 130 to 170 gsm. Below that, a shirt starts to feel thin and can lose its shape. Above it, a shirt starts to feel heavy in hot weather and dries more slowly after washing. Inside that range, the differences are real but small — 15 gsm either way is the difference between a shirt that feels feather-light and one that feels structured, not the difference between a good kit and a bad one.
GSM on its own does not tell you everything. Two fabrics at the same GSM can feel completely different, because the weave matters as much as the weight. A 150 gsm open-weave mesh lets far more air through than a 150 gsm smooth interlock, even though they weigh the same. So use GSM as a starting point, then ask what the weave is. That is what the rest of this post is about.
Durability is not weight either. A well-made 135 gsm shirt that is cut properly and stitched with reinforced seams will outlast a heavier shirt that is poorly made. The fabric sets the feel; the making sets the life of the kit.
Interlock: The Smooth, Matte Everyday Fabric
Interlock is a double-knit fabric. Two layers of loops are knitted together so the fabric looks the same on both sides: smooth, flat and matte, with no visible texture. It is the fabric most clubs picture when they think of a plain training shirt, and it is the fabric we use most for everyday training kits.
Interlock, at 140 to 160 gsm, sits in the middle of the range. It is smooth to the touch, it holds its shape wash after wash, and it takes a sublimation print cleanly across the whole garment. Because the surface is flat and even, colours print true and fine detail — a small badge, a thin line, a sponsor mark — stays sharp.
Interlock suits training kits best for three reasons. First, it is comfortable for repeated wear: it does not rub, it does not cling when a player sweats, and it does not feel different after its twentieth wash. Second, it is forgiving to make: it cuts cleanly, it sews cleanly, and the seams sit flat. Third, it is the most honest fabric for a club that wants one kit for everything — training on Tuesday, a friendly on Saturday — without buying two different weights.
Mesh and Micromesh: The Ventilated Match Fabric
Mesh is a knit with an open structure — tiny holes woven into the fabric that let air pass through. Hold a mesh shirt up to the light and you can see through it in places. That openness is the whole point: air moves through the shirt while the player runs, sweat evaporates faster, and the shirt stays lighter for longer.
Micro Mesh, at 130 to 150 gsm, is the mesh we use for match jerseys. The “micro” matters: the holes are small and even, so the fabric still looks like a proper match shirt rather than a net. It ventilates without looking ventilated. It is the usual choice for a match jersey, and the usual choice for any club playing in a hot climate, because the open weave does the cooling work that a heavier fabric cannot. Bird Eye Mesh, at 150 to 170 gsm, is the same idea with a slightly larger honeycomb structure and more airflow — common on training tops and warm-weather match jerseys.
Mesh is also the fabric that shows the biggest difference between a good kit and a cheap one. A well-made micromesh holds its shape, keeps its holes even, and prints cleanly. A poor mesh stretches out of shape, snags easily, and prints patchily where the ink cannot find a flat surface. That is why the fabric and the maker have to be judged together — and why we print by sublimation, so the colour becomes part of the fabric itself and never cracks, peels or fades, whatever the weave underneath.
One thing to know about mesh: it is a match fabric first. It is light, it breathes, and it looks right under floodlights. For training, where the shirt gets washed every week and worn hard, interlock is usually the more practical choice. Most clubs that order both use mesh for the match kit and interlock for the training kit, in the same colours, from the same design.
Pique: The Textured Fabric Clubs Ask About
Pique is the fabric most people know from polo shirts. It is a knit with a raised, dimpled texture — small geometric patterns woven into the surface, usually a fine waffle or honeycomb. You can feel it with your fingertips: where interlock is smooth and flat, pique has a visible texture and a slightly firmer hand.
That texture gives pique two qualities clubs like. It breathes better than a flat interlock, because the raised surface holds the fabric slightly away from the skin and lets air move. And it looks smart: the texture reads as a deliberate, tailored finish, which is why pique turns up on polo shirts, on training tops meant to be worn off the pitch, and on kits where the club wants a more classic, understated look.
Pique is also heavier than it looks. The raised knit uses more yarn, so a pique shirt at the same GSM as an interlock shirt feels thicker and warmer. That makes it a good choice for cooler weather and for off-pitch wear, and a less obvious choice for a match jersey in a hot climate, where mesh does the cooling job better.
It is worth saying plainly: pique is a fabric type, not a brand name, and not every manufacturer stocks it. We do — Pique, at 170 to 200 gsm, is one of the six fabrics on our soccer jersey fabrics page, and it is the right fabric for club polos and the travel and bench wear a squad turns up in on match day.
Micro Mesh and Brushed Fleece: The Two Ends of the Range
The lightest fabric we stock is Micro Mesh, at 130 to 150 gsm. It is the featherweight of the range: light, breathable and fast drying, made for players who want the shirt to disappear on their back. It suits teams that play fast, in hot weather, and want the least possible weight between them and the ball.
At the other end is Brushed Fleece, at 260 to 320 gsm. It is a heavier knit, brushed soft on the inside — the fabric behind our soccer hoodies, tracksuits and cold-weather warm-up wear. It is the right choice for the off-pitch set, where a lighter shirt would leave a player cold before kickoff.
Between the two sit the workhorses: Interlock at 140 to 160 gsm for training and match jerseys, Bird Eye Mesh at 150 to 170 gsm for warm-weather matches and training tops, and Pique at 170 to 200 gsm for club polos. Most clubs order from those three and use the extremes only where they fit — Micro Mesh for the lightest possible match shirt, Brushed Fleece for hoodies and cold weather. Tricot and Spandex, at 180 to 220 gsm, is the stretch fabric in the range — polyester with elastane for four-way stretch, used for compression base layers and tight-cut match shorts.
How to Choose: Climate, Level of Play, and Who Is Wearing It
Choosing a fabric is really three decisions, made in order.
First, the climate. Hot weather points to mesh: Micro Mesh at 130 to 150 gsm, or Bird Eye Mesh at 150 to 170 gsm if the squad wants more airflow. Cooler weather points to Brushed Fleece at 260 to 320 gsm for the off-pitch set, or Interlock at 140 to 160 gsm as the middle ground. If your club plays in both — a hot summer league and a cold winter cup — order the match kit in mesh and the training kit in interlock, and the squad is covered for both.
Second, the level of play. A match jersey is worn for ninety minutes at full effort, so it earns the best ventilated fabric you can afford. A training kit is worn for an hour, several times a week, and washed just as often, so it earns the fabric that holds up best to washing: interlock. A goalkeeper kit is worn by the player who hits the ground, so it earns Interlock, which holds its shape through dives and washes and gives the padding a firm base. The level of play decides which fabric is doing the hardest work, and the hardest-working fabric is the one worth choosing carefully.
Third, who is wearing it. Youth players grow fast and wash kits hard, so the fabric that survives the season matters more than the fabric that feels lightest on day one — interlock for training, micro mesh for matches. Adult players who play at a higher level notice the difference a lighter shirt makes, so Micro Mesh earns its place. And a squad that mixes youth, womens and mens cuts in one order can still use the same fabric family across all of them, because the fabric is chosen by the job, not by the size.
What the Fabric Does Not Decide
A good fabric cannot rescue a bad design, and a bad fabric cannot ruin a good one on its own. Three things matter as much as the fabric, and they are worth checking before you order.
The first is the print. All of our kits are printed by sublimation, so the colour becomes part of the fabric and never cracks, peels or fades, with no extra cost for extra colours. That is true on interlock, on mesh, on lightweight and on knit alike — the print and the fabric behave as one, because the colour is in the fibre, not on top of it.
The second is the cut. Sizes run from Youth XS through Adult 5XL on one design, with mens, womens and youth cuts cut to their own patterns, not scaled from a single template. A fabric that fits well in one cut and badly in another is a cutting problem, not a fabric problem.
The third is the making. Our six-stage process — design preparation, sublimation printing and heat pressing, precision cutting, assembly on JACK overlock machines, hand checking piece by piece, and packing, labelling and shipping — is the same whatever fabric you choose. Every piece is checked by hand before it is packed, and anything short of standard is remade. A fabric choice is a choice about feel and climate. The making is what makes the kit last.
Your Next Step
Start with the three decisions: climate, level of play, and who is wearing it. Then look at the full specification table on our soccer jersey fabrics page, where the six fabrics are set out side by side with their weights and best uses. Then send us your colours, your sizes and your design through the get a quote form, and we will send a free mockup within 24 hours with the fabric we recommend for your club. There is no minimum order, and the mockup comes with unlimited revisions until you approve it.
If you want the full picture of what a kit includes, start on the custom soccer uniforms hub. If you want to know how the fabric is made into a kit, the factory tour page shows the floor where it happens.



