Reversible Soccer Jerseys

A reversible soccer jersey gives a club two designs in one jersey. One side carries the home look, the other the away look, and a player turns the jersey inside out to change. For clubs that want a second kit without carrying two full sets, custom reversible soccer jerseys are a straightforward answer, and in training they can do the job of a separate bib.

Rexmon Industries makes reversible soccer jerseys as part of its custom soccer uniform range. Rexmon is a direct custom soccer uniform manufacturer in Sialkot, Pakistan, founded in 2018, working from its own facility with no middlemen. There is no minimum order — one piece or a full club.

What Is a Reversible Soccer Jersey?

A reversible soccer jersey is a single jersey printed and finished on both sides. Each side has its own colours, crest, numbers, and sponsor details, so it reads as a complete match jersey whichever way it is worn. Both sides are designed to be seen.

That makes it different from a standard single-sided jersey, where the inside is the reverse of the outside print and is not meant for play. With a reversible jersey, the neck, cuffs, and hem are finished so the jersey looks tidy from either side.

How the Two Sides Are Made

Rexmon makes reversible soccer jerseys with sublimation printing. With sublimation, colour becomes part of the fabric, so the print never cracks, peels, or fades. There are unlimited colours at no extra cost, and the print can run edge to edge for full coverage. That matters here, because both sides need full, sharp coverage rather than a faded reverse image.

Each side is designed separately, and the club approves both before production. Rexmon provides free design mockups within 24 hours, with unlimited revisions until approval. That approval step matters twice over: both designs need to be right, including crest placement, numbers, and sponsor marks.

Production follows six stages: design prep, print and heat press, cut, assemble with reinforced flexible seams, hand QC, and pack and ship, sorted and bagged by player. See the sublimation printing process.

Rexmon works with six fabrics: Interlock 140–160 GSM, a smooth dense double knit with the sharpest prints; Micro Mesh 130–150 GSM, a fine open mesh for hot climates; Bird Eye Mesh 150–170 GSM, a larger honeycomb mesh for training tops and warm-weather jerseys; Pique 170–200 GSM, a structured waffle knit for club polos and bench and travel wear; Tricot and Spandex Blend 180–220 GSM, a four-way stretch fabric for compression base layers and tight-cut match shorts; and Brushed Fleece 260–320 GSM, a heavier knit, brushed soft inside, for hoodies and cold-weather warm-ups. See the Rexmon fabrics page.

Weight and Feel

A reversible jersey is a double-sided garment, so it naturally feels different from a single-sided match jersey. It has two finished faces rather than one, and it still needs to feel comfortable for a full match or training session, so fabric and fit matter more than on a standard jersey.

In general terms, a lighter, more open fabric will feel cooler and more breathable, while a denser, smoother fabric will feel more structured and give a sharper printed finish. A club in hot conditions will usually lean towards a more breathable feel; a club wanting the crispest crest detail will lean towards a smoother, denser fabric.

Home and Away in One Jersey vs Two Separate Kits

Both routes give a club a home and an away look. They differ in how many garments a player carries, and how kit is stored and sorted.

FeatureReversible: home and away in oneTwo separate kits
Garments per playerOne jersey, two designsTwo jerseys, one design each
Match-day changeTurn the jersey inside outChange into the second jersey
Kit bagOne jersey per player to packTwo jerseys per player to pack
Training useOne jersey splits a group into two sidesNeeds separate bibs or a second kit
Design workTwo designs on one garmentTwo designs on two garments

The appeal is simple: fewer pieces to buy, pack, wash, and sort, with the same two looks on the pitch. A club ordering home and away kit packages may still prefer two separate kits for a fully independent set, including its own shorts and socks. Browse the soccer jerseys page.

Training Use: A Bibs Alternative

In training, a coach can split a squad into two sides by asking half the group to turn their jerseys. There is no need to hand out bibs, collect them afterwards, or wash a separate set of bibs.

This works best when the two sides are easy to tell apart at a glance. Strong contrast between the home and away designs helps players read the game quickly, especially in small-sided games. Check that contrast at the mockup stage.

Sizing: The Same Size on Both Sides

Sizing is straightforward: it is one garment, so it is one size. A player who wears a medium wears a medium on both sides, and the fit does not change when the jersey is turned. There is no separate size for the home side and the away side.

Rexmon sizes run from Youth XS (YXS) through Adult 5XL, with mens, womens, and youth cuts. Check the measurements for the chosen cut before ordering, because a youth cut and an adult cut fit differently. Full measurements are on the size guides page.

Ordering Reversible Soccer Jerseys

Ordering follows the same route as other Rexmon custom soccer uniforms, with both designs approved before production. Free design mockups are provided within 24 hours, with unlimited revisions until approval. Production is 7–15 working days after approval, and orders are sent with tracked worldwide shipping. Free U.S. shipping applies on orders over 10+ uniforms. There is no minimum order.

Rexmon serves 20+ countries, with 98% on-time delivery and dispatch, and a 4.9/5 rating from 500+ clients. For the steps, see how to order custom soccer uniforms. For pricing, see the custom soccer uniforms cost page. To start, visit the get a quote page or contact Rexmon at +92 324 975 9125 or contact@rexmonindustries.com.

Frequently Asked Questions

What is a reversible soccer jersey?

One jersey with two finished designs, one on each side. A player turns it inside out to change from home to away. Both sides have their own colours, crest, numbers, and sponsor details.

How are the two sides printed?

Rexmon uses sublimation printing. Colour becomes part of the fabric, so it never cracks, peels, or fades, with unlimited colours at no extra cost and edge-to-edge full coverage. Each side is designed and approved separately.

Is a reversible jersey heavier than a normal soccer jersey?

It is a double-sided garment, so it feels different from a single-sided jersey, but its feel depends on the fabric chosen. A lighter, more open fabric feels cooler and more breathable in general terms, while a denser fabric feels more structured and gives a sharper print.

Can a reversible jersey replace bibs in training?

Yes. A coach can split a training group into two sides by asking half the group to turn their jerseys, with no separate bibs to hand out or wash. Strong contrast between the two designs helps players tell the sides apart.

What sizes are available?

Sizes run from Youth XS (YXS) through Adult 5XL, with mens, womens, and youth cuts. It is one garment, so it is one size on both sides. Full measurements are on the Rexmon size guides page.

How long does production take after I approve the design?

Production is 7–15 working days after approval. Free design mockups are provided within 24 hours, with unlimited revisions until approval, and orders are sent with tracked worldwide shipping.