How to Wash Sublimated Soccer Jerseys
A sublimated soccer jersey is built to be washed. It goes through mud, sweat, grass and rain every week, and the print is made to survive all of it. But the way you wash it still matters. The right routine keeps the colours bright and the fabric soft for season after season. The wrong routine wears a good kit out long before its time.
The good news is that caring for a sublimated jersey is simple — a few habits, cold water, a gentle cycle, air drying, are all it takes.
Why Sublimated Print Holds Up in the Wash
Sublimation is different from printing on top of a shirt. With a screen print or a transfer, the design sits on the surface of the fabric, like a layer of paint. It can crack, peel or fade as the shirt is washed and worn.
Sublimation works the other way around. The ink is heated until it turns to gas and bonds with the fibres of the fabric itself. The colour becomes part of the shirt, not a layer on top of it. There is nothing to crack and nothing to peel, because there is no surface layer at all. That is why a sublimated jersey keeps its colours bright wash after wash, and why the print feels exactly like the rest of the shirt — soft, with no stiff patch where the design sits.
That does not mean the shirt is indestructible. The print is safe, but the fabric around it still needs care. Heat, harsh chemicals and rough handling wear out any garment, sublimated or not. The routine below protects the fabric, the stitching and the fit, so the whole kit lasts as long as the print does. You can read more about how the process works on our sublimation page.
What Actually Damages a Soccer Kit
Most kit damage comes from a short list of everyday mistakes. None of them are dramatic. They are the small habits that add up over a season.
Heat is the biggest one. Hot water and hot tumble drying break down the fibres of a polyester jersey, and over time they make the fabric feel rough and look tired. The print itself will not fade from heat, but the shirt around it will lose its shape and softness.
Harsh detergent is next. Strong powders and heavy-duty liquids strip the finish from the fabric and leave a residue that dulls the colours. Bleach is worse — it attacks both the fabric and the dye, and a single bleach wash can ruin a kit beyond repair.
Fabric softener is a quiet one. It coats the fibres with a waxy layer that blocks the fabric’s ability to breathe and wick sweat away — exactly what a match jersey is designed to do. It also leaves a film that traps smells instead of removing them.
Rough handling finishes the job. Wringing a wet jersey twists the seams and stretches the fabric out of shape. Scrubbing a stain hard with a brush wears the fibres thin. Ironing directly on the print melts the surface of the fibres. Dry cleaning is also unnecessary — its chemicals are harsher than anything the shirt will meet in a normal wash. None of these are necessary — the sections below show the gentler way to get the same result.
How to Wash a Sublimated Soccer Jersey, Step by Step
This is the whole routine. It takes no longer than a normal wash, and it works for every sublimated jersey, in every fabric we make — from our Interlock training kits to our Micro Mesh match jerseys.
Turn the jersey inside out. This is the single most useful habit. It keeps the printed side away from the drum and away from zips, buttons and rough seams on other clothes in the same load. The print never touches anything that could scuff it.
Wash with similar colours. A red jersey and a white jersey in the same load is asking for trouble, even with a print that does not bleed. Sort the kit bag by colour before it goes in the machine, and wash darks with darks and lights with lights.
Use cold water and a gentle cycle. Cold water cleans a polyester jersey perfectly well, and it is far kinder to the fabric than hot water. A gentle or delicate cycle keeps the drum speed down, so the shirt is not thrown around any harder than it needs to be. If your machine has a sports or synthetics setting, that is the right one.
Use a mild liquid detergent, and use less than you think. A small amount of mild liquid detergent is enough for a load of jerseys. Too much detergent leaves a residue that traps smells and dulls the fabric. Liquid dissolves more cleanly than powder in cold water, so it is the better choice here.
Do not overload the machine. Jerseys need room to move freely in the water. A drum packed tight does not clean properly, and the shirts rub against each other and come out creased and stretched. If the kit bag is full, split it into two loads.
Take the jersey out as soon as the cycle ends. A damp jersey left sitting in the machine starts to smell, and that smell is hard to wash out a second time. Hang it up to dry straight away.
That is the whole routine. No soaking, no special products, no extra steps. A cold gentle wash, inside out, with a little mild detergent, is all a sublimated jersey needs.
Drying Your Kit the Right Way
Drying is where more kits are damaged than in the wash itself, so it deserves the same care.
Air drying is the best option. Hang the jersey on a hanger or over a line, in the shade, with good airflow. It dries quickly — polyester does not hold water the way cotton does — and it comes out soft and ready to wear. Hanging it inside out helps the print side stay out of direct sunlight.
Keep it out of strong sun. Sunlight fades any colour over time, and a jersey left on the line in full sun all afternoon will lose its brightness faster than one dried in the shade. A shaded spot with a breeze dries the shirt just as fast and keeps the colours where they belong.
Never tumble dry on a hot setting. A hot dryer is the fastest way to shrink and stiffen a polyester jersey. It breaks down the fibres, weakens the seams and takes the softness out of the fabric. If you must use a dryer, use the coolest setting it has, and take the shirt out while it is still slightly damp. Air drying is still the better choice.
Never iron directly on the print. If a jersey needs pressing, use the lowest heat setting, iron it inside out, or place a cloth between the iron and the shirt. Better still, hang it straight from the wash and let the creases fall out on their own — a polyester jersey rarely needs an iron at all.
Getting Stains Out Without Damaging the Print
Grass, mud and blood are part of the game, and they will end up on the kit. Most of them come out with the normal wash if you act quickly.
Rinse the stain in cold water first, as soon as you can after the match. Cold water lifts fresh mud and grass far better than hot water, which can set a stain into the fabric. Let the cold water run through the marked area for a short while before the shirt goes in the machine.
For a stubborn mark, work a little mild liquid detergent into the stain with your fingers and leave it for a short while before washing. Gentle rubbing with your fingers is enough. Do not scrub with a brush, and do not use a stain remover that contains bleach. The print will not come off — the ink is part of the fabric — but hard scrubbing wears the fibres thin in that spot.
Wash the shirt on the next available load. The longer a stain sits, the harder it is to shift, and a shirt left in a kit bag for days will start to smell as well. A quick cold rinse and a prompt wash solves most stains before they become a problem.
How Often to Wash, and Storing Between Matches
Wash the kit after every match and every training session. Sweat left in the fabric feeds the bacteria that cause smells, and once a smell is set into polyester it is very hard to remove. A prompt wash keeps the shirt fresh and stops the smell building up over the season.
Do not leave a wet kit in the bag. A damp jersey sealed in a kit bag is the perfect place for smells and mildew to grow. Take the kit out of the bag when you get home, hang it up to air, and wash it on the next load. If you cannot wash it straight away, hang it up to dry first — a dry shirt waits far better than a wet one.
Store clean kits somewhere dry, out of direct sunlight, with room to breathe. A folded stack in a drawer is fine. A kit left in a hot car or a damp garage is not. Keep the shorts and socks with the same routine — they are made from the same fabric family, matched to the jersey, and they last longest with the same cold wash and air dry.
If your club orders a fresh set of kits, the care routine is the same from the first wash. A sublimated kit that is washed cold and dried in the air will look like a new kit far longer than one that is not, and that is true whether it is one shirt or a full squad. Our soccer uniforms are made in our own facility in Sialkot, in sizes from Youth XS to Adult 5XL, with no minimum order — one piece or a full club — so a replacement shirt or a whole new set is always the same quality.
Get a Kit That Is Made to Be Washed
A jersey that is washed every week needs to be built for it. That starts in the factory: sublimation printing that becomes part of the fabric, reinforced flexible seams, hand checking on every piece before it is packed, and fabrics chosen for match conditions — from the lightweight Micro Mesh for hot weather to the structured Interlock for goalkeepers. Every piece is sorted and bagged by player and shipped tracked worldwide, with free mockups within 24 hours and unlimited revisions until you approve the design. If your club needs a kit that survives a full season of washing, start with a free mockup — get your quote and see what your club could be wearing next season.



