Where to Put Sponsor Logos on a Soccer Jersey
A sponsor pays to be seen. If their logo lands in the wrong place on the shirt, it gets hidden behind a name, washed out against the pattern, or cropped out of the team photo — and the sponsor does not come back next season. This post covers every placement option on a soccer jersey, what reads best from the stands and in photos, and how to send us your sponsor artwork so it prints cleanly on the mockup. If you are still designing the kit itself, start on the custom design page, or pick a design from the designs gallery.
The Chest: The Main Sponsor Spot
The centre of the chest is the main sponsor spot. It is the largest clear area on the front of the shirt, it sits in the middle of every photo, and it is the first thing a spectator sees. If your club has one main sponsor, their logo goes here.
A chest logo works best when it has space around it. Give it a clear margin on every side: no pattern lines running through it, no badge crowding it, no collar cutting into it. On a busy patterned shirt, put the logo on a plain panel or a solid block of colour so it reads as one shape instead of fighting the design. A dark logo on a dark shirt, or a light logo on a light shirt, disappears from more than a few steps away, so check the contrast on the mockup before you approve anything.
The chest is also where the club badge usually sits. The usual arrangement is the badge on one side of the chest and the main sponsor across the centre, or the badge above the sponsor logo. Tell us where your badge goes and where your sponsor goes when you request the quote, and we lay both out on the mockup so you can see them together before anything is printed.
The Side of the Chest: The Second Sponsor Spot
The side of the chest — over one breast, opposite the badge — is the second sponsor spot. It suits a smaller logo, a second sponsor, or a club that wants the chest centre kept clear for the badge or for a clean design. It reads well in close-up photos and in team line-ups, where the camera is near enough to catch the side of the shirt. Keep it smaller than a centre-chest logo, clear of the collar, the sleeve seam and the badge, and check the whole front on the mockup — if the other side of the chest is empty, the shirt can look unbalanced.
The Sleeve: The Spot That Photographs Well
The sleeve is the most underused sponsor spot, and it is the one that photographs best during play. When a player runs, shoots or celebrates, the sleeve is often the part of the shirt the camera catches. Sleeve sponsors are common in professional football, and they work just as well for a club kit.
A sleeve logo has to be small and simple. The sleeve is a narrow space, so a logo with a long name or fine detail will not read at sleeve size. A short wordmark or a compact logo works best. Put it on the upper sleeve, clear of the seam and clear of any sleeve pattern, and check it on the mockup at full size. What looks fine on a screen can be unreadable on a sleeve.
If your club has two sponsors, a common split is the main sponsor on the chest and the second on the sleeve. Both get a clear spot, and neither has to share space with the other.
The Back: Above and Below the Number
The back of the shirt has two sponsor spots, and both come with a rule: never let the sponsor touch the number.
The spot above the number, between the collar and the top of the number, suits a short sponsor name or a small logo. It reads well in photos taken from behind. Keep it clear of the collar and clear of the top of the number, with a visible gap between the logo and the number below it.
The spot below the number, between the bottom of the number and the hem, suits a smaller logo or a sponsor that already has the chest. Keep it clear of the bottom of the number and clear of the hem, and remember that the shirt moves when a player runs, so a logo too close to the hem can fold or crease out of view.
The number itself is never negotiable. It must stay readable from the stands, and it must match the number on the front. If a sponsor logo crowds the number, the number loses. For the full rules on number sizing, placement and league requirements, see our guide to jersey numbers and fonts.
The Shorts: The Extra Spot Most Clubs Forget
The shorts carry one sponsor spot, usually on the front of one leg. It is a small space, so it suits a short wordmark or a compact logo, for a sponsor that wants to be on the kit without taking a shirt position.
A shorts logo needs to sit flat and clear of the seam, the drawstring and any side stripe. Because the shorts are smaller than the shirt, keep the logo simple — a long name will shrink to unreadable at shorts size.
What Reads Best From the Stands and in Photos
Sponsors pay for visibility, and visibility is decided by three things: size, contrast and position.
Size is the first. A logo big enough to read from the stands is worth more than one only legible in a close-up photo. The chest carries the biggest logo on the kit; the sleeve, the back and the shorts carry smaller ones. If a sponsor wants to be read from the far side of the pitch, the chest is the only spot that does it.
Contrast is the second. A logo needs to stand out from the shirt underneath it: a white logo on a white shirt, or a dark logo on a dark shirt, vanishes. If your sponsor logo clashes with your shirt colour, the fix is a backing panel behind the logo, or an outline around it so it separates from the pattern. We can add either one on the mockup, so check the contrast before you approve the design.
Position is the third. A logo in the middle of the chest is seen in every photo. A logo on the sleeve is seen when the player moves. A logo on the back is seen when the player turns away. Think about where your team is photographed most — team line-ups, action shots, celebrations — and put your main sponsor where the camera points.
One more check matters: the pattern. Sublimation printing covers the whole garment edge to edge, so a bold pattern can run right through a sponsor logo placed over it. Put the sponsor on a plain area, or ask us to break the pattern behind the logo so it sits on solid colour. Your free mockup shows the logo exactly where it will print, so check the pattern behind it before you approve anything.
Keeping the Sponsor Clear of Names and Numbers
The most common sponsor mistake is letting the logo crowd the names and numbers. The number must be readable from the stands and the name in photos, and the sponsor must not sit on top of either one.
Give every element its own space. The number gets the centre of the back. The name goes above the number, not through it. The sponsor gets its own spot — chest, sleeve, back above or below the number, or shorts — with a clear gap between it and the next element. If two elements are close enough to touch, move one of them. League rules add a second reason to keep the separation clean: most leagues set rules for number size and placement, and a sponsor logo that pushes a number into the wrong place can fail an inspection. Check your league’s rulebook before you approve the design, and tell us what it says when you request the quote. Our guide to jersey numbers and fonts covers the rules in general terms and links to the font range for the lettering itself.
How to Send Us Your Sponsor Artwork
A sponsor logo only prints as well as the file you send us. The best file is a vector file, which scales to any size without losing sharpness: an AI, EPS, SVG or PDF file. If your sponsor can send one of those, send it. It prints clean at chest size, at sleeve size, and at any size in between.
If your sponsor only has a raster image, a JPG or PNG, send the largest version they have. A small logo file stretched to chest size will print soft and blurry, and no work on our side can put detail back into a file that does not have it. Tell us the size you want it printed at, and we will check it on the mockup before anything is made.
Send the logo in its proper colours, and tell us if the sponsor has a brand colour that must be exact. Sublimation prints colour into the fabric itself, so it never cracks, peels or fades, and there is no extra cost for extra colours. But the colour on the shirt will only be as accurate as the file you send, so check the mockup against the sponsor brand guide before you approve it. If the logo needs a backing panel or an outline for contrast, tell us when you send the artwork. We lay the logo out on the design before anything is printed, and we send a free mockup within 24 hours, with unlimited revisions until you approve it. Check the sponsor logo on the mockup the same way you check the names and numbers: is it readable, is it in the right place, and does it sit clear of everything else on the shirt?
A Quick Placement Checklist
Before you approve your kit, run through this list:
- Main sponsor on the chest centre, with a clear margin on every side.
- Second sponsor on the sleeve or the side of the chest, not on top of the first one.
- Back sponsor above or below the number, never touching it.
- Shorts sponsor on one leg, small and simple.
- Logo contrast checked against the shirt colour and the pattern behind it.
- Names and numbers clear of every logo, with a visible gap between each element.
- Sponsor artwork sent as a vector file, or the largest raster file available.
- Mockup checked for the sponsor logo, the names and the numbers together, before approval.
Get the placement right and the sponsor is happy, the kit looks like a team kit, and the sponsor comes back next season. When you are ready, start on the custom design page or pick a design from the designs gallery, and get a quote with your sponsor artwork attached.